The six on the outside (three each side) are made from yew. The two in the front are olive ash & the one in the back middle is pine.
No matter what sort of woodworking I end up doing, I'll certainly make sure I have a steady supply of toy cars in the shop. No one could pass my bench without stopping & playing with the cars!!
Before I move on, I just wanted to say thank you to everyone for making the effort to be at the various places I appeared. It was wonderful seeing you all (curling, school, & work friends). I knew I was missing everyone, just didn't realize how much!
A very special thank you to my sister Sarah, for having me under her roof for soooo long (& fumigating the doggie dander out of my bedroom!).
I should mention the most thoughtful gift I received for Christmas: My niece, Jane, put together an album of this blog, complete with pictures! I gave it back with the hopes that it will be updated & re-presented for my birthday in July!!
After Christmas, I moved up to the cottage (-3F/-18C...without wind chill!). The Olympic torch made its way to Penetang. Very exciting! Very cold!
No snow shovels.
No problem getting my car out of the airport. However, my sqooshers didn't work...since the sqoosher fluid freezes!!
The main roads were clear & had been "gritted". I've since found out that grit is actually (chemical) salt. I managed to get all the home, only to get stuck in the driveway.
Sigh.
The snow was deeper than the clearance of the car's undercarriage. So there it was with its paws not touching the ground. Pinched the neighbours shovel (which, it turns out was mine), and shovelled the middle bit of the driveway (it's about 200 feet long). The neighbours (Kevin & sons) gave me a push, such that I could at least park the car. Later that day, the other neighbour (Jim) came by to say hello, & tell me that he'd parked at the end of the driveway (therefore blocking it) & was that okay. He then proceeded to say that my shovelling had wrecked his ability to drive in (there were two tracks made by his car, which I actually left undisturbed). I told him why I had done...then he proceeded to tell me that it was too bad I didn't know how to drive in the snow. (!) You'd think 32 years would be plenty!
I was quite literally speechless. I'm sure he didn't realize what he'd said. Funnily enough, he managed to get stuck a few times. I got myself out of the driveway & left my car in the lane, so I didn't have to ask for help later on! Jim has since followed suit.
Perhaps it would be better if he learned how to drive in the snow...Oops. Was that my out loud voice?
We challenged Athelstanford (we won, 3-2). There were BBQ's set up, hot soup, mulled wine, sloe gin, damsen gin...well, you get the idea.
A quick note on the configuration of rocks (bring your own stones!). Firstly, they are concave for indoor use on one side & convex on the opposite side. No sliders or sweeping. However, you have to HEAVE the rock down the sheet. The more it wobbles, the farther it seems to go. The rocks have to be left outside at least two days in advance (we broke two rocks!). The hacks are called crampets. They can be made of anything, but we used the cross hatched metal you see on metal stairs, with a turned up lip at the back. It's about three feet long & you put your back foot on the lip & using a very long stance you launch the stone in a similar fashion it seems as in bowling.
I haven't mentioned the temperature of the house...it was 40F/4C in the kitchen & 50F/9C in the livingroom. I found a switch on the Aga for continuous heat. Flicked that on & now have 70F/21C in the livingroom & 55F/12c in the kitchen. Hang the expense!! I made the assumption that the oil had been delivered before Christmas. Nope. Just filled up the day before yesterday. It must have been running on fumes!
So, I'm back at school. I've designed my second term project (it has to be a veneered piece of furniture): Wine cabinet/bar, veneered in satinwood. We've also started back in on our bench skills...two panels this week: Veneered on panel (both sides) with banding (similar to what you'd see on a veneer table (dining or end/nested), with feather banding around the edge (no idea where you'd see that!). The other panel is still using veneer, but creating shading & creating a "fan" pattern in marquetry.
I'm sure you are plenty bored (!) so all for now...

Hmmm, and Jim is still around is he? To bad the bogs have frozen over? Kidding! It was great seeing you and I did/do so enjoy your harried (in a good way I hope) adventures. Keep smiling!
ReplyDelete