Pictured above was taken this past weekend, looking east towards the Lammemuir hills. Notice green fields! We've since had more snow, but it should be gone by the weekend...except for the snow in the hills.
Once the full mat is achieved, you (with your mouse) put a further 4 coats of shellac on. Leave it overnight. The next day, you lightly wet sand from 600 grit to 12000 grit...12000 grit feels like leather and is used on airplane windshields to remove scratches. You start to see the gloss appear at about 8000 grit (all grits: 600, 1200. 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000).

I'm making very slow progress on my project. I've veneered a few of the panels for the inner bits. I did my best to give you a sketch of what the wine/bar cabinet will look like. There will be a drawer at the top. Those random bits under the drawer are to hang stemmed glasses. Then the grid will hold 12 bottles (3.5" in diametre). I've veneered the panels which will become the grid, the "shelves": These aren't really shelves, but there is one above & below the grid, one which has the slots for the glasses, and another for the drawer to sit upon. I think I've veneered them all & now I've started sanding & puting the sealing coats on. I still have to veneer the inner sides & cut the grid. Then I'll finally have something to assemble. I feel as though I'm about three weeks behind. The polishing has been taking up most of my time. Let's hope I get more done in the next couple of weeks!
I didn't get the “haggis, neeps & tatties on Rabbie (Robbie) Burns day (Monday, 25 Jan), but we DID have it instead of Wednesday's soup. Excellent fare! I can see how that could easily become a staple. Fills in all the corners of your tummy, tasty...and very, VERY filling...
The neeps by the way, are parsnips.
This week and last week, we are learning "polishing" techniques. Last week (and this past Monday), we've been learning how to "french polish". This is a high gloss finish which first appeared in the late 1700's (1790). If you have an old shiney diningroom table and/or sideboards, chances are, they have been french polished.
We prepared two mahogany veneered panels to be polished: One was a board where we used water (based) stains to create a striped (say stripe-ed) sample panel. The other was to be stained (using one of the stains on the stripe-ed...I hope you are saying this way in your head...feel free to roll the 'rrrr' a little).
French polish is shellac or white polish. It comes from bug/beetle ooze in India.
The time from start to finish is at least five days (!) to get the final finish. The first day you choose & apply the (water) stain & three sealing coats of shellac. Each day after that, you apply four coats of shellac, waiting at least an hour between each (more if possible). Each morning, the previous day's work is wet sanded (water on the board) with 600 or 1200 grit paper. What you are doing is trying to achieve a "full mat", which is as it sounds. No signs of gloss. Full mat means that you have filled all the grain & the surface is perfectly smooth. That usually (hopefully) occurs after 2 - 3 days (8 - 12 coats). I should mention that the shellac is applied (after the seal'd) with a polish mouse. It is rubbed in using a special and repetitive pattern...it is exhausting! Imagine the stickiest substance around & trying to rub it into your counters! Going over them the equivalent of six times...four times a day!
This is the finished result...You know you're done when you can see a perfect reflection...
Today, we started to learn how to apply a spray (cellulose) lacquer (not to be confused with water lacquer). Sand the board, 30 seconds to apply, let it dry for 45-60 minutes, sand & repeat...so far three times today. We'll see what happens tomorrow. It will be interesting to see & feel the difference. No need to tell me the difference in effort!
I'm coming down to the end of the curling season here. Two more regular games, plus I'm sparing in the Presidents vs Vice Presidents competition tomorrow, Saturday is a pairs competition (hopefully, someone will tell me how it works), Saturday night is a learn to curl session. It's finally becoming more fun...folks are loosening up a bit and actually starting to chat. I've got one of my skips actually used to my calling weight to the point where he actually scowled at me last night when I made a mistake on the call! I doubt that I can get them singing...not nearly enough time left in the season! I've started the hunt for outdoor curling rocks, but suspect they will be easier to make.

Okay. I think I'm boring even myself! Think I'll stop here...all for now...

No comments:
Post a Comment